Page 4
Thermo shaker PHMP/PHMP-4
Operating instructions
Disconnect the external power supply unit from power socket to turn off the unit.
If liquid penetrates into the unit, disconnect it from the external power supply unit and
have it checked by a repair and maintenance technician.
Do not operate the unit in premises where condensation can form. Operating conditions of
the unit are defined in the Specifications section.
DURING OPERATION
Do not leave the operating unit unattended.
Do not impede the platform motion.
Do not operate the unit in environments with aggressive or explosive chemical mixtures.
Please contact manufacturer for possible operation of the unit in specific atmospheres.
Do not operate the unit if it is faulty or has been installed incorrectly.
Do not use outside laboratory rooms.
Do not check the temperature by touch. Use a thermometer.
BIOLOGICAL SAFETY
It is the user's responsibility to carry out appropriate decontamination if hazardous
material is spilt on or penetrates into the equipment.
Version 3.01 - May 2015
To Next Page
Loading...