Page 3
Thermo shaker PHMP/PHMP-4
Operating instructions
1. Safety
The following symbols mean:
Caution! Make sure you have fully read and understood the present manual before
using the equipment. Please pay special attention to sections marked by
this symbol.
Caution! Surfaces can become hot during use.
GENERAL SAFETY
Use only as specified in the operating manual provided.
The unit should not be used if dropped or damaged.
The unit must be stored and transported in a horizontal position (see package label).
After transportation or storage keep the unit at room temperature for 2–3 hrs before
connecting it to the electric circuit.
Use only cleaning and decontamination methods recommended by the manufacturer.
Do not make modifications to the design of the unit.
ELECTRICAL SAFETY
Connect only to the external power supply unit with voltage corresponding to that on the
serial number label.
Use only the external power supply unit provided with this product.
Ensure that the switch and external power supply unit are easily accessible during use.
Do not plug the unit into an ungrounded power socket, and do not use an ungrounded
extension lead.
Disconnect the unit from the electric circuit before moving.
Version 3.01 - May 2015
To Next Page
Loading...