2. General Information
The Thermo shaker PHMP / PHMP-4 is designed for shaking 1 to 4 standard 96-well
plates in the thermal regulation mode.
The Thermo shaker was designed using the multi-system principle, which allows using it
as three independent devices:
1) incubator for lasting incubation of micro quantities (insect, plant cell cultures, etc.) in
plates;
2) plate shaker for operation in the cold room or other conditions, which do not require
temperature stabilization;
3) microplate thermo-Shaker for immunochemistry and molecular diagnostics, where the
requirements to the result reproducibility and thus to the precise method regulation
are particularly high.
The Thermo shaker PHMP / PHMP-4 provides:
·soft or intensive sample shaking;
·rotation speed regulation, stabilization and indication;
·even shaking amplitude throughout Shaker-Thermostat platform;
·required operation time setting and indication;
·automatic stopping of the platform movement after the set time expires;
·current operation time indication;
·setting and indication of the required temperature.
The device can be used in:
cytochemistry for in situ reactions;
immunochemistry for immunofermentative reactions;
biochemistry for enzyme and protein analysis;
molecular biology for matrix analysis, DNA and RNA analyses.
The maximum guaranteed number of diagnostic cycles in the Thermo Shaker mode,
which require 15-30 min work in one cycle, is 7000-14000 times.
External 12V power supply unit is used to power the device. It makes it safe to work in
the cold room, where condensation may cause leakage current from electric circuit.
Thermo shaker PHMP/PHMP-4
Operating instructions
Page 5
Version 3.01 - May 2015
To Next Page
Loading...