Grant 2020 Series User Manual

SQ2020/40 18108 Version 17
Page 6
www.grantinstruments.com
EN
Ethernet
Before using the Ethernet connection please read the configuration manual which can be
found under ‘~\SquirrelView\Manuals\SQ20xx Inbuilt Ethernet Configuration.pdf’ where
‘~\SquirrelView’ is the installation directory of SquirrelView. Connect your Ethernet network
to the Ethernet port on the logger.
Ethernet is only available when the logger is connected to an external power supply.

Grant 2020 Series Specifications

General

Category	Data Loggers
Interface	USB
Power Supply	Internal batteries, USB or external power supply
Temperature Range	-35°C to +85°C (-31°F to +185°F) (Logger dependent)
Accuracy	Logger dependent, refer to datasheet
Operating Temperature	-35°C to +85°C (-31°F to +185°F) (Logger dependent)
Measurement Parameters	Voltage, current, temperature, humidity, resistance, strain, events/state, count
Data Logging Interval	User selectable from 1 second to 12 hours
Dimensions	Logger dependent, refer to datasheet
Weight	Logger dependent, refer to datasheet
Battery Life	Up to 5 years (dependent on logging rate and logger model)