Declaration of Conformity
The Manufacturer:
GRANULDISK AB
Jägershillgatan 15
SE-213 75 MALMÖ, Sweden
declares that the following machinery:
The Granuldisk system GD 900
Basic conception
a) is manufactured in conformity with the Svenska Arbetarskyddsstyrelsens Författningssamling AFS1994:48. This law conforms
with the COUNCIL DIRECTIVE of 22 June 1998 concerning harmonisation of member states` legislation for machinery (the
Machinery Directive 98/37/EG), with particular reference to Annex 1 concerning the essential health and safety requirements relat
-
ing to the design and construction of the machinery.
b) is besides the provisions under a) manufactured according to the following directives: the EC Low Voltage Directive 73/23/EEC
and the EMC Directive 89/336/EEC
c) is manufactured in conformity with the following harmonised standards: EN 60204-1, EN 55014, EN 60335-2-58, EN 60439-
1, EN 418, EN 294, EN 50081-1:1992 and EN 50082-2:1995
d) is manufactured in conformity with the following national standards and technical
specifications: ELSÄK-FS 1994:7
e) is manufactured in accordance with EN 1717 and fitted with a return flow protection of type AB with an air gap in accordance
with EN 13077.
Malmö, Sweden 01.03.2005
Signed on behalf of GRANULDISK AB
GRANULDISK AB Jägershillgatan 15
SE-213 75 MALMÖ
Telefon: 040 671 50 60
Fax: 040 21 07 21
...............................................
Per Sandberg
(Managing Director)
To Next Page
Loading...
