GRANULDISK Granule Maxi - Page 50

5 Trouble shooting and alerts
5.2 Error codes
Error
code
Meaning
Cause
Remedy
110
Temp sensor
rinse tank not
working.
The temperature sensor
in the rinse tank is
broken.
Contact a service
engineer!
111
Temp sensor
wash tank not
working
The temperature sensor
in the wash tank is
broken
Contact a service
engineer!
112 Water level
too low in
rinse tank.
The level in the rinse
tank has fallen
incorrectly.
Contact a service
engineer!
113 Water level
too low in
wash tank.
The level in the wash
tank has fallen
incorrectly.
Contact a service
engineer!
114
Long wash
tank filling
time.
Wash tank filling has ex-
ceeded its time limit.
Check the water
supply to the ma-
chine, as well as the
rinse pump. Clean
the rinse nozzles.
Reset the alarm by
pressing the STOP
button. If the alarm
recurs, contact a
service engineer.
115
Long rinse
tank filling
time
Rinse tank filling has ex-
ceeded its time limit.
Check the water
supply to the ma-
chine, as well as the
solenoid valve for
rinse tank filling. Re-
set the alarm by
pressing the STOP
button. If the alarm
recurs, contact a
service engineer.
117
Long rinse
time.
Too long rinse time.
Correct water volume
has not been reached
in time.
Clean the rinse noz-
zles. Reset the alarm
by pressing the
STOP button. If the
alarm recurs, con-
tact a service
engineer.
50 Rev. 2021-11