GRAPHTEC Craft ROBO CC100-20 - How to Replace the Top Cover

4-2
4 DISASSEMBLY AMD REASSEMBLY
CC100-UM-251-9370
4.2 How to Replace the Top Cover
Disassembly
(1) Detach the left side cover (see Section 4.1).
(2) Pull out the top cover from the right side cover to detach the top cover.
Feed knob
Left side cover
Top cover
Right side cover
M3L8 self-tapping screw
Hook
Reassembly
(1) To attach the top cover, perform the above “Disassembly” procedure in reverse.