GRAPHTEC Craft ROBO CC100-20 - Disassembly and Reassembly; How to Replace the Left Side Cover

4-1
4 DISASSEMBLY AMD REASSEMBLY
CC100-UM-251-9370
4 DISASSEMBLY AND REASSEMBLY
4.1 How to Replace the Left Side Cover
Disassembly
(1) Pull the feed knob from the left side of the unit, and then detach the feed knob.
Feed knob
Left side cover
Top cover
M3L8 self-tapping screw
Hook
(2) Remove the two M3L8 self-tapping screws holding the left side cover.
(3) Release the bottom two hooks of the left side cover, and then detach the left side cover.
Hook
Hook hole
Release the hook here.
Reassembly
(1) To attach the left side cover, perform the above “Disassembly” procedure in reverse.