GRAPHTEC Craft ROBO CC100-20 - 3 List of Tools

3-1
3 LIST OF TOOLS
CC100-UM-251-9370
3 LIST OF TOOLS
No. Adjustment Item Jig Tool
1 Firmware update Verup.exe (Firmware update program file) PC, USB I/F cable
2 Pen force adjustment
Blade and blade holder, optionset.exe
(Electrical adjustment program)
Colex gauge (150 g, 300 g), PC,
USB I/F cable
3 Distance adjustment
Blade and blade holder, optionset.exe
(Electrical adjustment program)
Glass scale 300 mm, PC, USB I/F
cable
4
Auto Registration adjust-
ment
Blade and blade holder, optionset.exe
(Electrical adjustment program)
PC, USB I/F cable