Remove the camera and accessories from the bag.
The camera is composed of two parts that you have to
separate before mounting.
1 Remove completely the right screw as in the picture.
2 Release the left screw until the lower bracket is
released, leave the left screw in place there is a plastic
ring tha hold it.
3 Separate the camera from the bracket.
4 place the bracket on the left side of the plotter as
on the picture, push it all at left as the arrow 1 an then
pull in the direction of arrow 2.
2
3
1
1
4
Optical camera mounting
To Next Page
Loading...
