1
2
3
4
Suction cups and insertion flap replacement
There are two spare suction cups available into the accessory box.
You have to replace them when you notice some difficulties on picking
up the sheet. Upon a normal use of the feeder you have to replace
them once a year.
The insertion flap helps to keep the sheet flat during the unsertion.
You have to replace it when damaged.
1-2 Remove the left and right suction cup.
It get out easity if you pull it diagonally.
3 Replace the insertion flap if necessary
4 Insert the suction cups.
It is not so easey to insert the suction cup in place.
You have to hold the pneumatic terminal,
push firmly the custion cup
rotate bacn and forth the suction cup some times
until you can hear a click that means that it is in place.
You can moist it to help the insertion.
To Next Page
Loading...
