GRAPHTEC GL820 - 4 Setup Procedures; Entering the System Setup Menu

GL820-UM-251-9370 4-1
4. SETUP PROCEDURES
4. SETUP PROCEDURES
4.1 Entering the System Setup Menu
(1) Press the [MENU] key until the “OTHR” menu shown below appears.
(2) Press the [LEFT DOUBLE ARROW Direction] key 10 times in order to display the “Setup” menu shown
below.
(3) Move the cursor to the “Mode” position using the [Direction] keys.
(4) Press the [ENTER] key to display the menu from which you can execute the various Setup operations.
Setup mode
Setup1 (Basic)
Setup2 (Room temp.)
Setup3 (RTD temp.)
(5) Select the Setup mode using the [Direction] keys, and then press the [ENTER] key.