GRAPHTEC GL820 - Chapter 3 Settings and Measurement; Window names and functions; Key Operation; Operation Modes

GL820-UM-251-9370 5-1
5. INSPECTION AND CHECK PROCEDURES
5. INSPECTION AND CHECK PROCEDURES
5.1 Preparations for inspections
5.1.1 AC Line Setting
(1) Set the AC Line cycle setting of the GL820 to the same cycle as that of your AC line (See Section 4.2).
5.1.2 Sampling setting
(1) Set the Sampling setting of the GL820 to at least 1 sec or longer.
5.1.3 Copy the condition settings file
Condition settings les :GL820ConditionVolt.CND ← Condition settings for Voltage accuracy
:GL820ConditionTC.CND ← Condition settings for T and K range accuracy
:GL820ConditionPT.CND ← Condition settings for PT range accuracy
(1) Copy the condition settings le to a USB memory device from the computer.