3. Data record : How to Record
Once required settings are saved,you can record data while it is in process.
Recoded data is available for replay.
1. Start data recording
(1) Push the [START/STOP] key.
(2) A confirmation message is displayed.
2. Screen status during data recording
Once data recording starts, progress is visible on the screen.
The displayed time counts up or down.
(3) Push the [ENTER] key to start data record.
3. Stop recording
Push the [START/STOP] key to end the data recording.
(1) Push the [START/STOP] key.
(2) Confirmation message is displayed. Push the [ENTER] key.
(3) Recording ends, and the GL840 goes into the Free Running mode.
The operation of data recording is complete.
Recording message
elapsed time remaining time for data record
(The indication becomes ++++ when the available recording time is 9999 hours or more.)
15
Key Pointers
Recorded Data can be viewed while it is in progress by pressing the [REVIEW] key.
Data is available for viewing from the start to the point of real time recording while in
progress.
During the replay, arbitrary level values can be viewed by moving the cursor.
Return to the data capture screen by pressing the [REVIEW] key again.
* The [DISPLAY] key allows users to switch between the 1-screen and 2-screen.
To Next Page
Loading...
