13 October 2009 K2 Solo Media Server Accessories Installation Instructions 5
Installing the Handipak feet
Installing the Handipak feet
This section provides instructions for the following field kit.
Tools and materials needed:
• Torx tool with T15 magnetic tip
1. Power off the K2 Solo Media Server.
2. Install as shown.
Upgrade Nomenclature Description
K2-SOLO-HANDIPAK Handle and feet/protector kit
Position feet and attach
with 1 screw for each foot
Remove side screws at rear of unit
from holes required for attaching feet
1
2
To Next Page
Loading...
