Page 9
TRANSPORTING YOUR BUGGY
One of the main design criteria for the Grasshopper Classic, was ease of
transportation.
There are two options dependant or the type of vehicle used to carry your
buggy.
Firstly, if you have a large family hatchback, MPV or estate car, then you
are able to load the buggy into the rear of the vehicle without dismantling,
other than removing the seat (even this may not be necessary with larger
vehicles).
This is achieved by placing ramps up to the rear of the vehicle and using
the buggies own power, driving the buggy up into the vehicle.
Visit www.grass-hopper.co.uk and view a short video demonstrating how.
Secondly, if your car is not able to accommodate the fully assembled
buggy, you can easily dismantle the buggy into manageable parts
allowing it to be placed into the boot of most cars - The only tool
required is a 13mm Spanner to undo the battery terminals.
To Next Page
Loading...
Need help?
General
