Page 10
HOW TO DISMANTLE THE BUGGY
Remove the Seat - On the base of the seat stem you will find the seat
locking bolt. Turn this counter
clockwise to loosen the seat
from the frame. however the
lever can only rotate 180
degrees because of the body of
the buggy, to overcome this,
the lever has a ratchet system to allow further
movement. Pull the lever away from the post
turn it back to the original position and allow it
to spring back, once again turn the lever to
unscrew the bolt until the seat can be removed. To re-assemble reverse
the procedure.
Remove the Battery Cover and Batteries
Remove the battery cover by releasing
the three spring clips (four for the
Junior) and then pulling the cover up
and away from the frame.
Unscrew the battery terminal nuts and lift away the cables (only one nut
needs to be removed from the short link cable).
Lift batteries vertically from the frame and stand them in a secure
position.