Running a built-in programme (default programmes)
operating to the built-in programmes. These have been designed to
provide heating at typical times throughout the day.
The built-in programmes give you a starting point that you can
personalise to your own requirements, please see the section “Review/
Edit central heating program” or “Review/Edit domestic hot water
program”.
Built-in programme STD (STANDARD)
Daily
1)
Mo - Fr
1)
Sa - Su
Built-in programme HOME
Daily
1)
Mo - Fr
1)
Sa - Su
Built-in programme ECO
Daily
1)
Mo - Fr
1)
Sa - Su
The built-in programmes can be selected in the INSTALLERS MENU.
To access to installers menu, the device must be working in RUN mode.
10 sec.
INST MENU
DIGI CLOCK
BACKLIGHT
S W CHANGE
PROG TYPE
1. Make sure device is working in RUN mode.
Press and hold
INST MENU opens and OK
3.
.
Installers menu is activated.
until PROG TYPE is displayed.
Press
to edit settings.
Press
or to scroll through the menu. Choose your desired
setting (DAILY,
1)
,
1)
.
The choosen setting is saved.
NR PERIODS is displayed.
NR PERIODS
DEFAULT PROG
PUMP GRAVITY
Press
to go to DEFAULT PROG.
Press
to edit settings.
9. Press
or to scroll through the menu. Choose your desired
.
The choosen setting is saved
PUMP GRAVITY is displayed.
Press the MANUAL SELECTOR
To Next Page
Loading...
