Grasslin talento 371 - User Manual

1. Contents
2
GB
1. Contents Page
2. Assembly, putting into operation, connection 3
3. Control elements 4
4. Display 4
5. Factory setting 5
6. Changing settings 6
6.1 Time and day of the week 6
6.2 Calendar month and day 7
6.2.1 AU = Automatic changeover 7
6.2.2 cHA = Weekday-related time change 8 - 9
6.2.3 no = no changeover 10
7. Standard switching commands 11
8. Weekday block formation 12 - 13
9. Read – change – delete – reset 14 - 15
10. Hand switch 16
11. Technical data 17

Summary

2. Assembly, Putting Into Operation, and Connection

2.1 Assembly

Instructions for fitting the time switch onto a DIN rail or wall mounting.

2.2 Putting Into Operation

Steps to activate the time switch and its initial state in energy-saving mode.

2.3 Unit Connection and Safety

Information on unit connection and crucial safety instructions for wiring.

3. Control Elements Overview

4. Display Indicators and Functions

5. Factory Settings and Operating Modes

AM;PM Switch-over Procedure

Steps to switch between AM/PM display modes and set the operating mode.

6. Changing Settings

6.1 Time and Day of the Week

Procedure for setting the current time and selecting the day of the week.

6.2 Calendar Month and Day - Select Operating Mode

Guide to setting calendar month/day and selecting operating modes AU, cHA, or no.

6.2.2 cHA = Weekday-Related Time Change

Instructions for setting weekday-specific summer time changeover dates.

6.2.3 no = No Changeover

Procedure for setting the time switch to not perform automatic time changeovers.

7. Standard Switching Commands

8. Fixed Weekday Block Formation

9. Program Management: Read, Change, Delete, Reset

Read Program Contents

Stepwise reading of stored program contents and memory locations.

Change Program Contents

Procedure to modify or overwrite existing switching commands and contents.

Delete Individual Switching Commands

Steps to remove specific switching commands from memory.

Delete All Switching Commands

Procedure to clear all saved switching commands and memory locations.

Reset Function

How to reset the set date and time to factory default settings.

10. Hand Switch Modes

11. Technical Data

Grasslin talento 371 Specifications

General

Type	Digital Timer
Supply Voltage	230 V AC
Switching Capacity	16 A / 250 V AC
Number of Channels	1
Minimum Switching Time	1 minute
Battery Backup	Yes
Mounting Type	DIN Rail
Protection Class	IP20
Frequency	50Hz
Contact Type	Changeover contact
Timing Accuracy	±1 second/day
Operating Temperature	-10°C to +40°C