Grasslin talento 792 pro - User Manual

A
ON/OFF programming
1. Conrm ON/OFFbypressingOK.

Freememorylocationsarebrieydisplayed.
2. Whenprompted,selectchannels

andconrmbypressing .

OK

Theweekdaydisplayisashing.
ON command:
3. Selectthedesireddays

andconrmbypressing 

OK
4. Enterhour(+/-)

OK
5. Enterminutes(+/-)

OK
OFF command:
6. Whenprompted,selectdesireddays

andconrmbypressing


OK
7. Enterhour(+/-)

OK
8. Enterminutes(+/-)

OK

Theprogramissaved.
Create weekly program
B
Pulse programming
Apulseswitchingcommandconsistsof:
• Starttime
• Duration=ONswitchingduration
shortestONswitchingduration=1sec.
longestONswitchingduration=59min.,59sec.
Example:
ONcommandforchannel1dailyfromMondaytoFridayat3.00pm.
ONswitchingduration15minutes.
1. Conrm PULSEbypressingOK.

Freememorylocationsarebrieydisplayed.
2. Whenprompted,selectchannels

andconrmbypressing .

OK

Theweekdaydisplayisashing.
ON command:
3. Selectthedesireddays
andconrmbypressing 

OK
4. Enterhour(+/-)

OK
5. Enterminutes(+/-)

OK
Duration:
6. Enterminutesorseconds(+/-)andconrmbypressingOK.

Theprogramissaved.
C
Cycle programming
 Thecycledurationmustnotbelessthantheperiod.
Nonestingofcycleprogramsisallowed.
Acycleswitchingcommandconsistsof:
• Starttime
• Duration  =ONswitchingduration
• Period   =ONswitchingduration+pause
• Cycleduration =timebetweenchannel 
    ONandchannelOFF
• Stoptime
Create annual program
1)
A
NO REPEAT
Switchingonce.
Startandstopdate(year,
month,day,)aresetbyyou.

B
REPEAT
Recurringprogram.
Thisisdoneeachyearat
thesametimeuntilyou
removetheprograminthe
menuunderProgram

Delete.
A
NO REPEAT - ON/OFF programming
1. Conrm ON/OFFbypressingOK.

Freememorylocationsarebrieydisplayed.
2. Whenprompted,selectchannels
andconrmbypressing .

OK

Theweekdaydisplayisashing.
ON command:
3. Selectthedesireddays
andconrmbypressing 

OK
4. Enterstartdate(year,monthandday)intherelevantbox(+/-)

OK
5. Enterstopdate(year,monthandday)in
therelevantbox(+/-)

OK
6. Enterhour(+/-)

OK
7. Enterminutes(+/-)

OK
B
REPEAT - ON/OFF programming
1. Conrm ON/OFFbypressingOK.

Freememorylocationsarebrieydisplayed.
2. Whenprompted,selectchannels
andconrmbypressing .

OK

Theweekdaydisplayisashing.
ON command:
3. Selectthedesireddays
andconrmbypressing 

OK
4. Enterstartdate(monthandday)intherelevantbox(+/-)

OK
5. Enterstopdate(monthandday)intherelevantbox(+/-)

OK
6. Enterhour(+/-)

OK
7. Enterminutes(+/-)

OK
OFF command:
8. Whenprompted,selectdesireddays
andconrmbypressing


OK
9. Enterhour(+/-)

OK
10. Enterminutes(+/-)

OK

Theprogramissaved.
 ForCYCLEandPULSE,youalsohavetosetthedurationand/
orperiod.Theprocedureisthesameasforcreatingaweekly
program.
80.10.1321.7/11/11/01
Operatingmanual
talento 471/472 pro, talento 881/882 pro
talento 791/792 pro
Grässlin GmbH
Bundesstraße36
D-78112St.Georgen
Germany
Phone:+49(0)7724/933-0
Fax:+49(0)7724/933-240
www.graesslin.de
info@graesslin.de
Menu structure
1)
Functionnotavailableforallproducts.
Example:
Channel1isswitchedonevery30minutesfor10minutes,startingon
Monday9.00am.
ThestoptimeisFriday7.00pm.
StarttimeMonday 09.00am
Duration  10min.
Period  40min.
StoptimeFriday 07.00pm
1. Conrm CYCLEbypressingOK.

Freememorylocationsarebrieydisplayed.
2. Whenprompted,selectchannels
andconrmbypressing .

OK

Theweekdaydisplayisashing.
ON command:
3. Selectthedesireddays
andconrmbypressing 

OK
4. Enterhour(+/-)

OK
5. Enterminutes(+/-)

OK
Period:
6. Enterdays,hours,minutesorseconds(+/-)andconrmby
pressingOK.
Duration:
7. Enterdays,hours,minutesorseconds(+/-)andconrmby
pressingOK.
OFF command:
8. Whenprompted,selectdesireddays
andconrmbypressing


OK
9. Enterhour(+/-)

OK
10. Enterminutes(+/-)

OK

Theprogramissaved.
Safety Instructions
• Toavoidinjuries,thedevicemustbeinstalledbyaskilled
electricianonly!
• Beforechangingthebattery,thedevicemustbedisconnected
fromthepowersupply!
• Pleaseobservethenationalregulationsandsafetyinstructions.
• Interferencesandchangestothedevicewillinvalidatethe
warrantyandguarantyrights.
• Minimumdiameteroftheexiblelinesfortheterminals:1mm
2
.
Maximumdiameter:4mm
2
.
Readandobservetheseinstructionstoguaranteeaperfectfunction
ofthedeviceandasafeoperation.
Information about the device
Description of the device
Universaldigitaltimer
• 100or400memorylocations
1)
• Date-basedprogramming
• Pulse,cycleprogram
• PC-assistedprogramgeneration
• Weeklyprogram/annualprogram
1)
/holidayprogram/
astroprogram
1)
Designated use
• Thetimerisusedfor
– lightinginprivatehomesandcommerce
– advertising/streetlighting/shopwindowlighting
– controllingdevices,motorsandpumps
– controllingshuttersandblinds
– Presencesimulation
• MountingonlyonDINrail.
• Suitableforuseindryroomsonly!
• Donotinstallinthevicinityofdeviceshavinginductive
discharges(motors,transformers,etc.)
Danger! Risk of electric shock!

Installationmustbecarriedoutbya
professionalelectrician!
WARNING
Mounting on DIN rail
Putthedeviceslightlyinclinedontop
oftherail.Thenpushitbackwards
untilitengages.
Connection diagram
CH1=channel1
CH2=channel2
1)
S =externalinput
Amomentaryactionpush-buttoncan
beassignedtoremotelyoperateone
ofthechannels.Seeseparatesection
headedEXTI/P.
Installation and mounting
Operation and conguration
Display and function keys
• Switch-offcommandshaveahigherprioritythanswitch-on
commands.
• Thecentrallineofthedisplay,inwhichtheadjustedvaluesand
selectedmenuitemsaredisplayed,isdisplayedlarger.
• Flashingmeansthatanentryisrequired.Ifyoudonotenteranything
withintwominutes,thetimerswitchesbacktoautomaticoperation.
• “MAINSOFF”appearsonthedisplaywhenthedeviceisnotsupplied
withpower.
• “LOWBATT”appearsonthedisplaywhenabatterychangeis
requiredwithinthenexttwoweeks.
• Theprogramsareretainedafterareset,althoughyouwillneedto
readjustdateandtime.Pressall4buttonsatthesametimetoreset
thedevice.
Display
A Functiondisplaysofthetwo
leftkeys
B Switchingstatedisplays(ON/
OFF/OVR/FIX)
C3displaylines
D Weekdays
Theassignmentcanbe
changedintheDATETIME
menu,forexampleto
1=Sunday.
 Defaultsetting1=Monday
E Programmedswitchingtimes
F Radioantenna
G Displayofsummer/wintertime
H Functiondisplaysofthetwo
rightkeys
Function displays of the two left keys:
 Scrollupwardsinthemenu
 Scrolldownwardsinthemenu
 Acceptselection/proposal
+ Briefkeypress=+1/longkeypress(about2sec)=fastforward
- Briefkeypress=-1/longkeypress(about2sec)=fastforward
Function displays of the two right keys:
MENU LeavesAutomaticmodeandentersProgrammingmode
ESC Briefkeypress=onestepbackward
  Longkeypress(about2sec)=BacktoAutomaticmode
OK Makeaselectionandaccept
EDT Changeprogramsin“Readmode”
NO Donotexecutecommand
YES Executecommand
DEL Delete
Technical data
DimensionsHxWxD(mm) 45x35x60
Weightg(approx.) 220
Mainvoltage Seeratingplate
Protectionclass ||
Powerconsumption 1VA
Switchingcapacity
– Ohmicload(VDE,IEC)
– Inductiveloadcosφ0.6
– Incandescent-/Halogenlampload
– Fluorescentlamp
– RatedloadAC1/AC15

16A/250VAC
10A/250VAC
2600W
1000W
3700W/750W
Switchingcontacts Change-overcontact
Ambienttemperature -10°C...+55°C
Accuracy Type±0,3sec./dayat+20°C
Shortestswitchinginterval 1sec..
Switchingstatedisplay Yes
Sealable Yes
Danger! Risk of electric shock!

Installationmustbecarriedoutbya
professionalelectrician!
WARNING
Keys/Interfaces
I Rightkeys
J Infraredinterface
K Leftkeyswithmanual
switchfunctionin
Automaticmode
Switchover summertime/wintertime
Thefollowingsettingsare
possible:
AUTO
In-factorydefaultsettingas
speciedbylaw(USAorEU).Itwill
berecalculatedeveryyear.
NO
Nochangeover.
CALIBR 1 (AUTO)
ManualProgramming.Theprogrammedsummer/wintertimewillbe
recalculatedautomaticallyforeachyear.
– Thechange-overalwaystakesplaceontherst Sundayofthe
selectedmonth,iftheentereddateliesbetween1.and15.
– Thechange-overalwaystakesplaceonthelast Sundayofthe
selectedmonth,iftheentereddateliesbetween16.and31.
– Thetimechange-over(summertime/wintertime)occursonthe
respectiveSundayat1o‘clockUTC(CoordinatedUniversal
Time).
CALIBR 2 (FIX)
ManualProgramming.
Thechange-overtakesplaceeveryyearalwaysonthesamedate.
Select menu language
Whendelivered,thetimerisinautomatic
modewithpresettime,date(CET)and
menuinEnglish.
PresstheMenubuttontomakesettings.
Thenselectthedesiredsetting.
Set date and time
OFF command:
8. Whenprompted,selectdesireddays
andconrmbypressing


OK
9. Enterhour(+/-)

OK
10. Enterminutes(+/-)

OK

Theprogramissaved.
 ForCYCLEandPULSE,youalsohavetosetthedurationand/
orperiod.Theprocedureisthesameasforcreatingaweekly
program.
2)
 AvailableonlyifindividualdayshavebeenselectedfortheON
command.
3)
 Settheweekdayinaccordancewiththecurrentdate.
4)
 OnlyappearswhentheAstro-settingsarenotset.
EN
MENU
1
15
:
26
1 6 12 18 24
2
1 OFF
ON 2
ESC OK
OVRFIX
1612 18 24
A
F
B
C
D
E
H
I
J
K
15:26
G
1
1 OFF ON 2
2
3 N
LS65
2
CH1
max. 100 m
1
CH2
M
~
M
~
MENU
PROGRAM
NEW
ANNUAL
1)
WEEKLY
HOLIDAY
ASTRO
1)
DELETE
REVIEW
CONFIG
TAXIMODE
LIGHT
PIN
H COUNTER
EXT I/P
ASTRO
1)
DAYLIGHT
AUTO
NO
CALIBR 1
CALIBR 2
RANDOM LANGUAGE
ENGLISH
DEUTSCH
...
DATETIME
12H 24H
AM PM
24H
MENU
PROGRAM
NEW
WEEKLY
CYCLE
ONOFF
PULSE
OK
OK
OK
A
B
C
ON/OFF
OK
SELECT CHL
1)
DAY CHL ON
HOUR CHL ON
MIN CHL ON
OK
OK
OK
OK
DAY CHL OFF
2)
HOUR CHL OFF
MIN CHL OFF
OK
OK
OK
SAVED
PULSE
OK
SELECT CHL
1)
DAY CHL ON
HOUR CHL ON
MIN CHL ON
MIN DURATION
SEC DURATION
OK
OK
OK
OK
OK
OK
SAVED
MENU
PROGRAM
NEW
ANNUAL
REPEAT
NO REPEAT
OK
OK
OK
CYCLE
ONOFF
PULSE
OK
B
A
MENU
LANGUAGE
ENGLISH
OK
OK
MENU
DATETIME
YEAR
MONTH
DAY
DAY
3)
HOUR
OK
OK
OK
OK
OK
OK
MINUTE
OK
TIMEZONE
OK
MENU
DAYLIGHT
AUTO
NO
CALIBR 1
OK
CALIBR 2
15.00 h
duration
starttime
19.00 h9.00 h
duration
period
pause
durationofthecycle
channelON
channelOFF
starttime
stoptime
HOUR CHL ON
MIN CHL ON
OK
OK
DAY CHL OFF
2)
OK
HOUR CHL OFF
MIN CHL OFF
SAVED
OK
OK
ON/OFF
OK
SELECT CHL
1)
DAY CHL ON
YEAR START
MONTH START
DAY START
YEAR END
MONTH END
OK
OK
OK
OK
OK
OK
OK
DAY END
OK
CYCLE
OK
SELECT CHL
1)
DAY CHL ON
OK
OK
OK
HOUR CHL ON
MIN CHL ON
PERIOD DAY
PERIOD HOURS
OK
OK
OK
PERIOD MIN
OK
OK
PERIOD SEC
DURATION DAY
DURATION HOUR
DURATION MIN
OK
OK
OK
DURATION SEC
OK
DAY CHL OFF
2)
OK
HOUR CHL OFF
MIN CHL OFF
SAVED
OK
OK
HOUR CHL ON
MIN CHL ON
OK
OK
DAY CHL OFF
2)
OK
HOUR CHL OFF
MIN CHL OFF
SAVED
OK
OK
ON/OFF
OK
SELECT CHL
1)
DAY CHL ON
MONTH START
DAY START
MONTH END
DAY END
OK
OK
OK
OK
OK
OK
talento_471-472-791-792-881-882_pro_EN_A3.indd 1 16.02.2012 10:40:01

Summary

Installation and Wiring

Connection Diagram

Illustrates the wiring connections for the device.

Safety Warnings

General Safety Precautions

Provides essential safety information and warnings for device operation.

Device Information

Device Overview

Details the main components and features of the time switch.

Program Creation

Creating an ASTRO Program

Guides on setting up programs based on astronomical twilight times.

Creating a Holiday Program

Instructions for setting up programs for specific holiday periods.

Configuration and Maintenance

Device Configuration Options

Covers settings like background illumination, PIN, and hour counters.

Battery Change Procedure

Step-by-step guide for replacing the device's internal battery.

Disposal and Recycling

Information on environmentally sound disposal of the device and packaging.

Grasslin talento 792 pro Specifications

General

Operating Voltage	230 V AC
Frequency	50-60 Hz
Number of Channels	2
Shortest Switching Time	1 min
Manual Override	Yes
Protection Class	IP20
Mounting	DIN rail
Display	LCD
Switching Capacity	16 A / 250 V AC
Program	Weekly program
Type	Digital
Battery backup	10 years
Contact Type	Potential-free changeover contact