Grasslin talento 372 - User Manual

1. Contents
2
GB
1. Contents Page
2. Assembly, putting into operation, connection 3
3. Control elements 4
4. Display 4
5. Factory setting 5
6. Changing settings 6
6.1 Time and day of the week 6
6.2 Calendar month and day 7
6.2.1 AU = Automatic changeover 7
6.2.2 cHA = Weekday-related time change 8 - 9
6.2.3 no = no changeover 10
7. Standard switching commands 11
8. Weekday block formation 12 - 13
9. Read – change – delete – reset 14 - 15
10. Hand switch 16
11. Technical data 17

Summary

Assembly, Operation, and Connection Guide

Time Switch Assembly

Instructions for mounting the time switch on a DIN rail or wall.

Initial Operation Steps

Activating the device, energy-saving mode, and display indicators.

Connecting the Time Switch

Procedure for wiring the unit and activating the display.

Control Elements Identification

Display Interface Explained

Factory Settings and Operating Modes

Changing Settings and Operating Modes

Setting Current Time and Day

Procedure to set the current time and day of the week.

Setting Calendar Month and Day

Procedure to set the current calendar month and day.

Automatic Changeover (AU)

Configuration for automatic summer/winter time changeover.

Weekday-Related Time Change (CHA)

Configuration for weekday-specific time changeover.

No Changeover (no) Mode

Procedure to disable automatic time changeover.

Standard Switching Command Procedures

Weekday Block Formation

Program Management: Read, Change, Delete, Reset

Manual Operation Modes

Technical Data and Specifications

Grasslin talento 372 Specifications

General

Type	Digital timer
Number of channels	2
Mounting type	DIN rail
Operating voltage	230 V AC
Switching capacity	16 A
Program type	Weekly program
Shortest switching time	1 minute
Protection class	IP20
Time setting range	1 minute to 7 days