Agusta A119 Koala
18
List of parts
Part
No.
Description Material / dimensions in mm No. off
1 Fuselage shell, right / left Clear plastic, smoked tint 1 each
2 Horizontal stabiliser, bottom shell,
right / left
Clear plastic, smoked tint 1 each
3 Horizontal stabiliser, top panel,(scrap
material from parts 1)
Clear plastic, smoked tint
approx. 55 x 25
1 each
4 Battery hatch cover
(scrap material from parts 1)
Clear plastic, smoked tint
approx. 55 x 40
1
5 Dummy exhaust pipes Clear plastic, smoked tint 2
6 Chassis base plate Beech ply, approx. 240 x 60 x 1,5 1
7 Lateral chassis stiffener Beech ply, approx. 205 x 12 x 1,5 2
8 In-fill piece Balsa, 60 x 40 x 6 1
9 Skid bar, front / rear Pre-formed piano wire 1 each
10 Skid bar sheath ABS tube, 2/3 Ø x 135 2
11 Skid tube CFRP tube, 5/3 Ø x 170 2
11 Skid tube tips Nose of aluminium skid tube, 5/4 Ø 2
12 Skid joiner Beech dowel, 3 Ø x 20 2
13 Stand-off pillar CFRP rod, 2 Ø x 70 1
14 Horizontal stabiliser joiner CFRP rod, 2 Ø x 130 1
15 Fly screen Plastic, 50 x 50 1
16 Tailskid piano wire, 1 Ø x 100 1
17 Window masks Masking film, pre-cut 1
18 Full-colour decal sheet 1
To Previous Page
Loading...
