www.modellmarkt24.ch; www.modellmarkt24.de
49
Model type selection (Type of model)
here you can choose the model type.
By selecting “Plane” you will be able to access the gyrosettings for surface models, as described in chapter 4.
The selection “Heli” will be made available through a future software update. It will enable a receiverintegrated ybarless
system, which can be adjusted inside the transmitters telemetry settings.
Display Explanation Settings
RECEIVER 1.0 1.0 indicates the version of the receiver’s rmware -
TYPE OF MODEL Selection of modeltype Plane, Heli
ALARM VOLT. Alarm threshold for the receiver’s low voltage
warning
2.5 - 24.0 V
Default setting: 3.8 V
ALARM TEMP.
Receiver overheating warning
50 - 80° C
Default setting: +70° C
Max. altitude
Maximum altitude
0 - 2500 m
in 25 m increments
PERIOD Cycle time (frame rate) in ms 10 / 20 ms
SUMD at CH8 (6) Digital sum signal at channel 8 (6) Yes / No
Sensor at CH 9 Telemetry-Sensor at channel 9 (only at GR-18) Yes / No
LANGUAGE
Select menu language
German, English, French,
Italian, Spanish
www.modellmarkt24.ch; www.modellmarkt24.de
To Next Page
Loading...
Need help?
General
