GRAUPNER MICRO MAGIC

GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY #0057088
Keine Haftung für Druckfehler. Technische Änderungen vorbehalten! No liability for printing errors. We reserve the right to introduce
modifications. Sous réserve de modifications! Nous ne sommes pas responsables d’éventuelles erreurs d’impression! 11/2006
30
Parts List
No. Description No. off Material Size in mm
1 Front support plate (boatstand) 1 Plywood 4 mm, laser-cut
2 Rear support plate (boatstand) 1 Plywood 4 mm, laser-cut
3 Side panel (boatstand) 4 Plywood 4 mm, laser-cut
4 Protective stand lining material 1 Self-adhesive foam tape Cut lengths to suit
5 Keel / mast socket 2 ABS Vac.-moulded,
CNC-trimmed
6 Mast support reinforcement 2 Plywood 2 mm, laser-cut
7 Servo mount support 2 Plywood 2 mm, laser-cut
8 Hull 1 ABS Vac.-moulded,
CNC-trimmed
9 Bow reinforcement 1 Plywood 2 mm, laser-cut
10 Rudder bush reinforcement 2 Plywood 2 mm, laser-cut
11 Servo plate 1 Plywood 2 mm, laser-cut
12 Sail servo reinforcement 2 Plywood 2 mm, laser-cut
13 Jib trim servo reinforcement 1 Plywood 2 mm, laser-cut
14 Deck 1 ABS Vac.-moulded,
CNC-trimmed
15 Cockpit bulkhead 1 Plywood 2 mm, laser-cut
16 Rudder servo plate 1 Plywood 2 mm, laser-cut
17 Rudder servo reinforcement, large 1 Plywood 2 mm, laser-cut
18 Rudder servo reinforcement, small 1 Plywood 2 mm, laser-cut
19 Central bulkhead 1 Plywood 2 mm, laser-cut
20 Shroud reinforcement 2 Plywood 2 mm, laser-cut
21 Canopy latch reinforcement 4 Plywood 2 mm, laser-cut
22 Stern reinforcement 1 Plywood 2 mm, laser-cut
23 Stern side reinforcement 2 Plywood 2 mm, laser-cut
24 Captive nut 4 Metal M2
25 Central girder 1 Spruce strip 3 x 8 x 210 mm
26 Rudder bush 1 Brass tube 4 Ø x 3.1 Ø x 30 mm
27 Rudder 1 Plastic Ready made
28 Rudder servo 1 Order No. 5125.LOSE Ready made
29 Rudder servo output arm 2 Order No. 3941.50 Ready made
30 Tiller 1 Plastic Ready made
31 Cable guide 2 Snake inner sleeve 2 Ø x 0.8 x 15 mm
32 Sheet guide 2 Plastic Ready made
33 Fillister-head screw 14 Stainless steel 2.2 Ø x 6.5 mm
34 Ring-screw 4 Nickel-plated brass 3.8 Ø x 1.5 Ø x 11 mm
35 Washer 5 Nickel-plated brass 4.5 Ø x 2.2 Ø x 0.5 mm
36 Sail-setting servo 1 Order No. 4103.LOSE Ready made
37 Jib trim servo 1 Order No. 5125.LOSE Ready made
38 Switch 1 Order No. 3934.1 Ready made
39 Sail-setting lever 1 Plastic Ready made
40 Pulley block 2 Plastic Ready made
41 Fillister-head screw 2 Stainless steel 2.2 Ø x 9.5 mm
42 Jib sheet 1 Polyester cord 0.4 Ø x 500 mm
43 Washer 3 Nickel-plated brass Ready made
44 Mainsail sheet 1 Polyester cord 0.4 Ø x 500 mm
45 Rudder steering cable 2 Polyester cord 0.4 Ø x 300 mm
46 Tensioner 9 Plastic Ready made
47 Turnbuckle 4 Plastic Ready made
48 Keel 1 Plastic Ready made
49 Keel adaptor set 4 Plastic Ready made
50 Keel ballast bulb 1 Lead (TOXIC !) Ready made
51 Retaining pin 2 Steel 1.5 Ø x 15 mm
52 Keel bulb fairing 2 ABS Vac.-moulded
53 Retaining nut 1 Nickel-plated brass M2.5
54 Gasket 1 Rubber cord 2.5 mm Ø, overlength
55 Canopy 1 ABS Vac.-moulded, CNC- trimmed
56 Mast 1 CFRP tube 5 Ø x 4 Ø x 850 mm
57 Mast sleeve 1 Aluminium tube 6 Ø x 5 Ø x 115 mm