GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY
We reserve the right to introduce modifications. Not liable for printing errors! 12/2011
Made in
Vietnam
14
Glue the pilot figure into place as shown in the photo. Experience has shown that the
pilot figure can be secured using double-sided tape, Order No. 2904.
The cockpit canopy is attached to the fuselage using transparent adhesive film.
Installing the receiver
As shown in the photo, the receiver is fastened to the RC board using foam and
hook-and-loop cable strips. When running the aerials for the receiver, make sure that
they are oriented at a 90 ° angle to one another. T o do so, also observe the
instructions for the receiver / RC system.
Installing the switch in the fuselage
To Next Page
Loading...
