Need help?Do you have a question about the Gravely 814 and is the answer not in the manual?
Covers transmission fluid capacity, type, and checking procedures for all models.
Details engine oil capacity, specifications, and change intervals for specific models.
Outlines engine oil capacity, specifications, and change intervals for the 816 model.
Specifies hydraulic fluid type, capacity, and checking for lift models.
Details greasing points, frequency, and specific lubrication for bearings and linkage.
Instructions on cleaning, replacing, and inspecting the air cleaner element.
Proper tire pressure, electrolyte level checks, and adding distilled water.
Specifications for spark plug gap, valve clearances, and clutch adjustments.
Explains PTO lever free travel and adjustment procedures for proper engagement.
Step-by-step instructions for starting the engine and shutting it down safely.
Details on using the direction control, gear, and range selectors for motion.
Procedures for operating the Power Take Off (PTO) clutch.
Describes the liftable rear hitch for the 816, its securing positions, and pin mounting.
Explains the rear hitch for these models used with trailing hitch kits.
Instructions for mounting 50" and 40" rotary mowers, height adjustment, and lubrication.
Details on installing and removing the 38" and 44" snowblowers with the front drive kit.
Requirements and mounting procedures for attachments using a four-bolt system.
Information on using trailing hitch kits for attachments like carts.
Instructions for mounting a tiller, including lubrication and PTO connection.
Mounting instructions for snowdozers and mowers via axle mount.
How to adjust cutting height for mowers using adjustment rods and pins.
General lubrication guidelines for various attachment fittings and gearboxes.
To Next Page
General