Need help?Do you have a question about the Gravely CONVERTIBLE 7.6 and is the answer not in the manual?
Troubleshooting hard starting or loss of engine power.
Diagnosing and resolving engine overheating issues.
Identifying causes for engine backfiring.
Addressing occasional engine skipping at high speeds.
Troubleshooting erratic engine performance.
Resolving issues with the engine not idling correctly.
Recommended intervals for changing engine oil.
Guidelines for replacing the engine oil filter.
Details on carburetor adjustment and fuel supply system.
Explanation of the engine's idle system operation.
Description of the high-speed fuel system.
How the choke system functions.
Procedure for separating carburetor bodies.
Steps to disassemble the throttle body.
Instructions for disassembling the fuel bowl.
Methods for cleaning carburetor parts.
Checking carburetor components for wear or damage.
Steps for reassembling the fuel bowl.
Details on spark plug gap and type.
Guide for setting the engine's ignition timing.
Lubrication requirements for the magneto.
Procedure for replacing and adjusting breaker points.
Steps to remove and replace the condenser.
Instructions for servicing the coil and coil core.
Method for removing the coil from its core.
Detailed steps for overhauling the governor.
How to test and interpret oil pressure readings.
Procedure for performing engine compression tests.
Troubleshooting causes of low engine compression.
Ensuring proper cooling system operation.
Guidelines for cleaning external tractor surfaces.
Details on the fan shaft and bearings.
Procedure for removing the cylinder.
Steps for reconditioning cylinder bore and surfaces.
Cold valve adjustment settings for intake and exhaust.
Instructions for removing valves from the cylinder.
Steps for removing the standard differential.
To Next Page
General