Need help?Do you have a question about the Gravely 810 and is the answer not in the manual?
Details about the warranty coverage and limitations for Gravely equipment.
Guidance on learning to operate the tractor safely and effectively before use.
Steps to prepare the work area and the tractor before starting operation.
Procedures and precautions for operating the tractor safely during use.
Explanation of the forward/reverse control lever and its operation.
Details on the brake pedal, parking brake, and their functions.
How to use the gear and range selectors for different speeds.
Information on engaging and disengaging the power take-off (PTO).
Instructions for operating the manual lift system for attachments.
How to adjust and use the position lock for the manual lift lever.
Procedures for operating the hydraulic lift system for attachments.
Function and operation of the choke control for starting the engine.
How to use the key ignition switch to start and stop the engine.
Operation of the tractor's light switch for illumination.
Location and replacement of the tractor's fuse.
Purpose of the hour meter for maintenance scheduling.
How to read the fuel gauge for tank level indication.
Recommended operating procedures for the first hour of use.
Checks to perform before starting the engine.
Step-by-step guide to starting the tractor's engine.
Procedures for safely shutting down the tractor's engine.
How to start moving the tractor forward or in reverse.
Methods for stopping the tractor's movement.
Steps for properly parking the tractor.
When and how to engage/disengage the PTO.
Operating powered equipment with the tractor.
Critical procedure for changing gears to avoid transmission damage.
Suggested ground speeds for different operating conditions.
Conditions for operating the tractor's headlights.
Engine oil level check and maintenance procedures.
Engine oil change frequency, capacity, grade, and procedure.
Transmission oil capacity, grade, viscosity, and service intervals.
Procedure for changing transmission oil and filter.
Ensuring proper timing between direction control and brake application.
Adjusting the brake band lining and overall brake system.
Checking battery fluid level and maintenance.
Maintaining good electrical contact and cleaning battery terminals.
Safety precautions for charging and servicing the battery.
Procedures and cautions for jump starting the battery.
Tire pressure recommendations and adjustments.
Tire track width options for different tractor models.
Maintaining fuse holder, replacing blown fuses.
Replacing headlight bulbs and maintaining light sockets.
Checking tightness of nuts, bolts, and screws.
Visually inspecting hair pin cotters to ensure they are in place.
Procedures for removing, cleaning, gapping, and replacing the spark plug.
Recommended procedures for out-of-season storage of the tractor.
Steps to take after storing the tractor for a period.
Specifications for engine models, spark plug gap, and oil recommendations.
Specifications for transmission oil capacity, grade, and viscosity.
General specifications for fuel, tires, ground speed, fuse, battery, and hydraulic fluid.
To Next Page
General