To Next PageTo Next PageWhat to do if my Gravely 994142 Lawn Mower cranks but does not start?
If your Gravely Lawn Mower engine cranks but doesn't start, several factors could be responsible. Start by ensuring the fuel tank isn't empty and that the fuel supply is adequate. A weak battery can also prevent starting, so check the voltage and charge if required.
Why does my Gravely Lawn Mower unit not drive?
If the unit does not drive, first disengage the parking brake. Also, ensure that the transmission bypass levers are closed. Check the hydraulic oil level and add oil if it is low.
Why won't the PTO or mower blades engage on my Gravely 994142 Lawn Mower?
If the PTO or mower blades on your Gravely Lawn Mower do not engage or shut off, make sure the operator presence switch is depressed by holding down the right steering control handle.
Why does my Gravely 994142 Lawn Mower engine not crank?
If your Gravely Lawn Mower engine won't crank, there are several potential causes. First, ensure the PTO is disengaged and the parking brake is engaged. Check for loose or corroded battery cables, and clean and tighten them if necessary. A discharged or weak battery could also be the culprit, so charge the battery or check its voltage. Additionally, inspect the main fuse and relays in the fuse block, replacing them if needed. Finally, examine the wire harness and connections for any loose or broken wires.
What to do if my Gravely 994142 Lawn Mower engine runs when off?
If your Gravely Lawn Mower engine continues to run when the ignition key is in the off position, it could be due to a disconnected ignition ground wire. Connect the ground wire to a clean metal surface.
General| Brand | Gravely |
|---|---|
| Model | 994142 |
| Category | Lawn Mower |
| Language | English |
Essential safety rules, laws, emission controls, and operator training requirements for safe operation.
Explanation of the safety alert symbol, signal words (Danger, Warning, Caution), and their meanings.
Visual identification and explanation of safety decals placed on the machine for user awareness.
Details on the ignition switch, choke, throttle lever, and PTO switch for starting and controlling the engine.
Steps to quickly stop the engine and unit in an emergency situation, especially on slopes.
Essential checks including fuel, oil, hydraulic levels, air cleaner, and control functionality before use.
Procedures to verify the proper function of safety interlock systems for operator protection.
Step-by-step instructions for safely starting the engine, including choke and throttle usage.
Guidance on driving the unit, controlling direction, speed, and engaging the PTO for mowing.
Procedures for safely shutting down the engine and unit after operation, ensuring all parts stop.
Diagnosing and correcting problems related to engine not cranking or not starting.
