Gravely Pro-Walk 36 User Manual (English)

Questions and Answers:

D
Daniel WilsonAug 20, 2025
How to fix Gravely Pro-Walk 36 Lawn Mower when engine does not start?
- V
  Veronica NicholsonAug 21, 2025
  If your Gravely Lawn Mower's engine isn't starting, several factors could be the cause. Ensure the PTO switch is in the off position by pushing it down. Engage the parking brake and return the drive control grip to neutral. If the engine is cold, pull the choke knob out. Check if the fuel tank is empty and fill it if needed, or replace contaminated fuel with clean fuel. Make sure the battery is charged, and clean and tighten any loose or corroded battery cables. Also, check the safety interlock system. For spark plug issues, refer to the engine manual.
C
Christopher SmithAug 25, 2025
Why does my Gravely Lawn Mower engine run rough?
- A
  Adam MartinAug 25, 2025
  A rough-running engine on your Gravely Lawn Mower can stem from a few issues. Check that the choke control knob is in the off position. If the fuel tank is empty, refill it. Issues with the spark plug, fuel filter, or air filter cartridge could also be the cause; refer to the engine manual for guidance on replacing these parts.
B
Benjamin WilsonAug 26, 2025
What to do if my Gravely Pro-Walk 36 does not drive?
- E
  echristianAug 27, 2025
  If your Gravely Lawn Mower isn't driving, start by checking if the parking brake is engaged and release it. Ensure the transaxles are not bypassed by returning the bypass levers to the operating position. Also, inspect the transaxle drive belt and replace it if it's faulty. Finally, add hydraulic oil if the level is low.
R
Robert RogersAug 27, 2025
Why is my Gravely Pro-Walk 36 Lawn Mower engine overheating?
- R
  randyreyesAug 28, 2025
  If your Gravely Lawn Mower engine is overheating, first check the engine oil level and add oil as needed. Also, ensure the cooling fins are clean.
B
Benjamin TurnerAug 29, 2025
How to improve cutting quality of Gravely Pro-Walk 36 Lawn Mower?
- K
  Kimberly MontoyaAug 29, 2025
  To improve the cutting quality of your Gravely Lawn Mower, level and adjust the pitch of the mower deck. Sharpen or replace the mower blades if they are dull or faulty. Reduce your mowing speed if it's too fast. Replace the PTO belt if the belt tension or condition is poor. Avoid setting the cutting height too low, and for very tall grass, consider mowing twice.
C
Curtis SmithAug 31, 2025
What to do if PTO does not work on Gravely Pro-Walk 36?
- S
  Sharon LewisAug 31, 2025
  If the PTO on your Gravely Lawn Mower isn't working, the PTO belt may be faulty and need replacement.
R
ryanmillerSep 2, 2025
What causes Gravely Pro-Walk 36 engine to run when key is off?
- E
  Emily SchroederSep 2, 2025
  If your Gravely Lawn Mower engine continues to run even when the ignition key is in the off position, it could be due to a disconnected ignition ground wire. Connect the ground wire to a clean, metal surface.
B
brownanitaSep 4, 2025
Why Gravely Pro-Walk 36 doesn't drive straight with steering lock on?
- D
  dorseycarlSep 4, 2025
  If your Gravely Lawn Mower doesn't drive straight when the steering-lock lever is engaged, check the tire pressures and inflate them to the recommended levels.
V
veronicataylorSep 5, 2025
Why does my Gravely Pro-Walk 36 Lawn Mower move with the engine off and parking brake on?
- J
  Jonathan MartinSep 5, 2025
  If your Gravely Lawn Mower moves with the engine off and the parking brake engaged, the parking brake likely needs adjustment. Adjust the parking brake lever.
R
Roy HendersonSep 7, 2025
Why does my Gravely Pro-Walk 36 Lawn Mower creep in neutral?
- M
  morganelizabethSep 7, 2025
  If your Gravely Lawn Mower creeps when the drive control grip is in the neutral position, the transaxle linkages may need adjustment.

Gravely Pro-Walk 36 Specifications

General

Brand	Gravely
Model	Pro-Walk 36
Category	Lawn Mower
Language	English

Summary

WELCOME AND REGISTRATION

PRODUCT REGISTRATION

MANUALS AND DISCLAIMER

Read the manuals provided with the unit. Gravely reserves the right to make changes...

SAFETY GUIDELINES

OPERATOR TRAINING AND SAFETY SYMBOLS

Read and understand the Operator's Manual and decals. Understand safety alert symbols and signal words.

PERSONAL PROTECTION AND PRE-OPERATION CHECKS

Wear appropriate clothing. Evaluate terrain, inspect area, and check fasteners.

OPERATIONAL SAFETY RULES

Never operate in enclosed areas. Keep hands/feet away from moving parts. Avoid slippery surfaces.

OPERATING CONDITIONS AND FUEL

SAFE OPERATION ON SLOPES AND IN WEATHER

Slopes are a major factor in loss of control. Avoid operating in lightning or wet conditions.

FUEL HANDLING PRECAUTIONS

Use extreme care in handling gasoline. Ethanol blends must not exceed E10.

SERVICE AND TRANSPORT

TOWING AND BATTERY SAFETY

Do not attach towed equipment other than a sulky. Avoid electric shock and battery hazards.

UNIT SERVICE AND STORAGE

Use non-genuine parts cautiously. Transport securely. Store in a cool, dry area.

ASSEMBLY AND CONTROLS

UNIT ASSEMBLY STEPS

Remove packaging, cut ties, check tires, oil, battery, and hardware.

KEY CONTROLS OVERVIEW

Ignition, choke, throttle, PTO, operator presence, drive grip, deck lift, parking brake.

SYSTEM INDICATORS AND CHECKS

Hour meter, starting lights, safety interlock, and before operation checklist.

OPERATION PROCEDURES

STARTING AND OPERATING THE UNIT

Steps to start the engine and operate the unit safely.

STOPPING AND MANUAL MOVEMENT

Procedures for stopping the engine and moving the unit manually.

MAINTENANCE SCHEDULE

SERVICE POSITION AND PROCEDURES

Place unit in service position. Disconnect battery. Chock wheels. Strap unit onto lift.

RECOMMENDED MAINTENANCE INTERVALS

Schedule for checking safety systems, fluid changes, lubrication, and filter services.

SERVICE AND ADJUSTMENTS

ELECTRICAL, NEUTRAL SWITCH, AND STEERING ADJUSTMENTS

Service components, adjust neutral switches, steering lock, and steering cable.

BRAKE, HANDLEBAR, AND BELT REPLACEMENT

Adjust parking brake cable/lever, handlebar height, replace PTO and transaxle belts.

DECK, BLADE, AND CLUTCH ADJUSTMENTS

Adjust anti-scalp wheels, install/remove deck, level/pitch deck, adjust blade pitch and clutch.

TROUBLESHOOTING

ENGINE STARTING AND RUNNING ISSUES

Addresses problems like engine not starting, running rough, or overheating.

DRIVE, STEERING, AND CUTTING ISSUES

Troubleshooting for unit not driving, poor steering, or poor cutting quality.

STORAGE AND PREPARATION

SHORT-TERM AND LONG-TERM STORAGE

Procedures for storing the unit for short and long periods.

START-OF-SEASON PREPARATION

Steps before first use after long-term storage, including fuel and battery.

ACCESSORIES

AVAILABLE ACCESSORIES

List of compatible accessories and their part numbers for purchase.

SPECIFICATIONS

MODEL SPECIFICATIONS

Technical data for Pro-Walk models including engine, dimensions, and weight.

WARRANTY INFORMATION

LIMITED WARRANTY AND SPECIAL EXTENSIONS

Covers product warranty periods, including special extensions for deck shell and frame.

WARRANTY EXCEPTIONS AND CUSTOMER RESPONSIBILITIES

Lists excluded items, customer duties like registration and maintenance, and service location.

LEGAL DISCLAIMERS AND LIMITATIONS

Covers limitations of remedy, damages, and disclaimers of further warranty.

Related product manuals

Gravely Pro-walk hydro 36HR PG

56 pages

Gravely Pro-Walk Hydro 36HR PS