Gravely Pro-Walk 48 User Manual (English)

Questions and Answers:

D
Daniel WillisAug 20, 2025
How to fix Gravely Lawn Mower when engine does not start?
- J
  Jared HernandezAug 20, 2025
  If your Gravely Lawn Mower's engine isn't starting, several factors could be the cause. Ensure the PTO switch is in the off position by pushing it down. Engage the parking brake and return the drive control grip to neutral. If the engine is cold, pull the choke knob out. Check if the fuel tank is empty and fill it if needed, or replace contaminated fuel with clean fuel. Make sure the battery is charged, and clean and tighten any loose or corroded battery cables. Also, check the safety interlock system. For spark plug issues, refer to the engine manual.
K
keithsandersAug 25, 2025
Why does my Gravely Pro-Walk 48 Lawn Mower engine run rough?
- C
  Charlotte AllisonAug 25, 2025
  A rough-running engine on your Gravely Lawn Mower can stem from a few issues. Check that the choke control knob is in the off position. If the fuel tank is empty, refill it. Issues with the spark plug, fuel filter, or air filter cartridge could also be the cause; refer to the engine manual for guidance on replacing these parts.
V
Veronica BowmanAug 26, 2025
What to do if my Gravely Lawn Mower does not drive?
- S
  Scott DuncanAug 26, 2025
  If your Gravely Lawn Mower isn't driving, start by checking if the parking brake is engaged and release it. Ensure the transaxles are not bypassed by returning the bypass levers to the operating position. Also, inspect the transaxle drive belt and replace it if it's faulty. Finally, add hydraulic oil if the level is low.
W
William SimsAug 27, 2025
Why is my Gravely Pro-Walk 48 engine overheating?
- A
  amy59Aug 27, 2025
  If your Gravely Lawn Mower engine is overheating, first check the engine oil level and add oil as needed. Also, ensure the cooling fins are clean.
C
Craig DrakeAug 29, 2025
How to improve cutting quality of Gravely Pro-Walk 48?
- U
  umayAug 29, 2025
  To improve the cutting quality of your Gravely Lawn Mower, level and adjust the pitch of the mower deck. Sharpen or replace the mower blades if they are dull or faulty. Reduce your mowing speed if it's too fast. Replace the PTO belt if the belt tension or condition is poor. Avoid setting the cutting height too low, and for very tall grass, consider mowing twice.
B
Brett FisherAug 31, 2025
What to do if PTO does not work on Gravely Pro-Walk 48 Lawn Mower?
- R
  Randy CastilloAug 31, 2025
  If the PTO on your Gravely Lawn Mower isn't working, the PTO belt may be faulty and need replacement.
T
Tammy ChandlerSep 2, 2025
What causes Gravely Pro-Walk 48 engine to run when key is off?
- A
  Amy ShafferSep 2, 2025
  If your Gravely Lawn Mower engine continues to run even when the ignition key is in the off position, it could be due to a disconnected ignition ground wire. Connect the ground wire to a clean, metal surface.
R
Richard JonesSep 4, 2025
Why Gravely Pro-Walk 48 Lawn Mower doesn't drive straight with steering lock on?
- O
  Olivia DuranSep 4, 2025
  If your Gravely Lawn Mower doesn't drive straight when the steering-lock lever is engaged, check the tire pressures and inflate them to the recommended levels.
C
Caitlin BlairSep 5, 2025
Why does my Gravely Pro-Walk 48 move with the engine off and parking brake on?
- P
  Phillip Norman IISep 5, 2025
  If your Gravely Lawn Mower moves with the engine off and the parking brake engaged, the parking brake likely needs adjustment. Adjust the parking brake lever.
H
Henry MontoyaSep 7, 2025
Why does my Gravely Pro-Walk 48 creep in neutral?
- R
  Rebekah MarshallSep 7, 2025
  If your Gravely Lawn Mower creeps when the drive control grip is in the neutral position, the transaxle linkages may need adjustment.