Why does my Gravely Pro-Walk 52 Lawn Mower move with the engine off and parking brake on?
If your Gravely Lawn Mower moves with the engine off and the parking brake engaged, the parking brake likely needs adjustment. Adjust the parking brake lever.
Why my Gravely Lawn Mower engine does not start?
There are several reasons why your Gravely Lawn Mower engine might not be starting: * The PTO switch may be in the on position. Push it down to the off position. * The parking brake may be released. Engage the parking brake. * The speed control lever may not be in the rearmost position. Set it to the rearmost position. * If the engine is cold, pull the choke knob out to the on position. * The fuel tank might be empty or the fuel supply contaminated. Fill the fuel tank or replace the fuel. * The battery may not be charged, or the battery cables may be loose or corroded. Charge the battery or clean and tighten the cables. * The spark plug wire(s) may be loose, or the spark plug(s) may be faulty. Connect the spark plug wire(s) or replace the spark plug(s). * The safety interl...
Why does my Gravely Pro-Walk 52 unit not drive straight?
If your Gravely Lawn Mower isn't driving straight, the tire pressures may be outside the recommended ranges. Check the tire pressures and inflate them to the recommended level.
Why does Gravely Pro-Walk 52 Lawn Mower engine run when ignition key is off?
If your Gravely Lawn Mower's engine continues to run even when the ignition key is in the off position, it could be that the ignition ground wire is disconnected. Connect the ground wire to a clean, metal surface.
Why does Gravely Pro-Walk 52 unit move with engine off and parking brake engaged?
If your Gravely Lawn Mower moves when the engine is off and the parking brake is engaged, the parking brake likely needs adjustment. Adjust the parking brake lever.
What to do if my Gravely Pro-Walk 52 PTO does not work?
If the PTO on your Gravely Lawn Mower isn't working, the PTO belt may be faulty. Replace the PTO belt.
What to do if Gravely Lawn Mower engine overheats?
If your Gravely Lawn Mower engine is overheating: * Check if the engine oil level is low and add engine oil if needed. * See if the cooling fins are plugged and clean the engine.
Why does my Gravely Pro-Walk 52 Lawn Mower unit have poor cutting quality?
If your Gravely Lawn Mower isn't cutting properly, here are a few things to check: * The mower blades may not be level, or the mower deck pitch may be incorrect. Level and adjust the pitch of the mower deck. * The mower blades may be dull or faulty. Sharpen or replace the mower blades. * Your mowing speed may be too fast. Drive slower when cutting grass. * The belt tension or condition may be poor. Replace the PTO belt. * The cutting height may be too low. Avoid setting the height of cut too low.
Why does my Gravely Lawn Mower creep in neutral?
If your Gravely Lawn Mower creeps when the drive control grip is in the neutral position, the transaxle linkages may need adjustment.
How to fix Gravely Lawn Mower when engine does not start?
If your Gravely Lawn Mower's engine isn't starting, several factors could be the cause. Ensure the PTO switch is in the off position by pushing it down. Engage the parking brake and return the drive control grip to neutral. If the engine is cold, pull the choke knob out. Check if the fuel tank is empty and fill it if needed, or replace contaminated fuel with clean fuel. Make sure the battery is charged, and clean and tighten any loose or corroded battery cables. Also, check the safety interlock system. For spark plug issues, refer to the engine manual.
Register product with model and serial numbers.
Read manuals for safety; company reserves right to change products.
Understand safety symbols, rules, hazards, protection, and pre-checks.
Starting, operating, stopping, manual movement, and conditions.
Identify and understand all unit controls and indicators.
Follow schedule for service, repair, and lubrication.
Diagnose and resolve common engine and drive system issues.
Review detailed technical data for models and components.
Proper procedures for storing the unit and preparing it for use.
Information on compatible accessories and limited warranty coverage.
General| Cutting Width | 52 inches |
|---|---|
| Engine Model | FS691V |
| Engine Displacement | 726 cc |
| Transmission | Hydro-Gear |
| Blade Tip Speed | 18, 000 ft/min |
| Turning Radius | 0 inches |
| Warranty | 3 years |
To Next Page