Why Gravely Pro-Walk 52 Lawn Mower doesn't drive straight with steering lock on?
If your Gravely Lawn Mower doesn't drive straight when the steering-lock lever is engaged, check the tire pressures and inflate them to the recommended levels.
What causes Gravely Lawn Mower engine to run when key is off?
If your Gravely Lawn Mower engine continues to run even when the ignition key is in the off position, it could be due to a disconnected ignition ground wire. Connect the ground wire to a clean, metal surface.
What to do if PTO does not work on Gravely Pro-Walk 52 Lawn Mower?
If the PTO on your Gravely Lawn Mower isn't working, the PTO belt may be faulty and need replacement.
How to improve cutting quality of Gravely Lawn Mower?
To improve the cutting quality of your Gravely Lawn Mower, level and adjust the pitch of the mower deck. Sharpen or replace the mower blades if they are dull or faulty. Reduce your mowing speed if it's too fast. Replace the PTO belt if the belt tension or condition is poor. Avoid setting the cutting height too low, and for very tall grass, consider mowing twice.
Why is my Gravely Pro-Walk 52 engine overheating?
If your Gravely Lawn Mower engine is overheating, first check the engine oil level and add oil as needed. Also, ensure the cooling fins are clean.
What to do if my Gravely Lawn Mower does not drive?
If your Gravely Lawn Mower isn't driving, start by checking if the parking brake is engaged and release it. Ensure the transaxles are not bypassed by returning the bypass levers to the operating position. Also, inspect the transaxle drive belt and replace it if it's faulty. Finally, add hydraulic oil if the level is low.
Why does my Gravely Lawn Mower engine run rough?
A rough-running engine on your Gravely Lawn Mower can stem from a few issues. Check that the choke control knob is in the off position. If the fuel tank is empty, refill it. Issues with the spark plug, fuel filter, or air filter cartridge could also be the cause; refer to the engine manual for guidance on replacing these parts.
Register product with model and serial numbers.
Read manuals for safety; company reserves right to change products.
Understand safety symbols, rules, hazards, protection, and pre-checks.
Starting, operating, stopping, manual movement, and conditions.
Identify and understand all unit controls and indicators.
Follow schedule for service, repair, and lubrication.
Diagnose and resolve common engine and drive system issues.
Review detailed technical data for models and components.
Proper procedures for storing the unit and preparing it for use.
Information on compatible accessories and limited warranty coverage.
General| Cutting Width | 52 inches |
|---|---|
| Engine Model | FS691V |
| Engine Displacement | 726 cc |
| Transmission | Hydro-Gear |
| Blade Tip Speed | 18, 000 ft/min |
| Turning Radius | 0 inches |
| Warranty | 3 years |
To Next Page