GB - 15
TRANSPORTING UNIT
ALWAYS shut off engine, set parking brake,
and remove key when transporting unit on a
truck or trailer. Tie unit down securely. Do not
tie down by linkages, guards, cables or other
parts that may be damaged.
FOR BEST PERFORMANCE
Cut grass when it is dry.
Keep mower blades sharp.
Keep mower deck properly leveled.
Adjust anti-scalp rollers to prevent scalping.
Do not set height of cut too low. For very tall
grass, mow twice.
Do not travel too fast.
Mow with the engine set at full throttle.
When mulching, only remove 1/3 of grass
length per cutting.
Discharge clippings into areas already cut.
Vary cutting pattern with each mowing.
Do not allow grass or debris to collect inside
of mower deck. Clean after each use.
Figure 5
1. Left Bypass Valve Lever
2. Right Bypass Valve Lever
Front of unit
2
1
OF3371
To Next Page
Loading...
