EasyManuals Logo

Gravely ZT HD 44 Owner's/Operator's Manual

Gravely ZT HD 44
40 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #19 background imageLoading...
Page #19 background image
EN - 19
Proper maintenance can prolong the life of
unit. The following charts show the
recommended service schedule. More
frequent service may be required due to
working conditions (heavy loads, high
ambient temperatures, dusty conditions, or
airborne debris).
See the maintenance instructions in the
Engine Manual for additional information.
MAINTENANCE SCHEDULE
WARNING: AVOID INJURY. Read
and understand entire Safety
section before proceeding.
Period Service Task
Each
Use
Check Safety Interlock WARNING: Safety interlock system failure
and improper operation of unit can result in
death or serious injury. Test this system
each time the unit is operated. If this
system does not function as described, do
not operate until repairs are made. See
Safety Interlock System on page 14.
Check Parking Brake
Interlock System
See Parking Brake Interlock System on page 14.
Check Hydraulic Fluid Check hydraulic oil level mark on cap/dipstick. Add
15W-50 synthetic motor oil (Gravely p/n 00057100)
or equivalent as needed. Do not overfill. See Check
Hydraulic Fluid Level on page 21.
Check Tires See Specifications on page 34 for correct tire
pressure.
CAUTION: Avoid injury! Explosive
separation of tire and rim parts is possible
when they are serviced incorrectly:
Do not attempt to mount a tire without the
proper equipment and experience to perform
the job.
Do not inflate the tires above the
recommended pressure.
Do not weld or heat a wheel and tire
assembly. Heat can cause an increase in air
pressure resulting in an explosion. Welding
can structurally weaken or deform the wheel.
Do not stand in front or over the tire assembly
when inflating. Use a clip-on chuck and
extension hose long enough to allow you to
stand to one side.
Clean Unit Clean engine, battery, seat, mower deck, etc. of dirt
and debris. Do not use solvents, hard cleaners, or
abrasives.
IMPORTANT: Do not spray the unit with water,
especially when the unit is warm from operation.
Water can seep into bearings and damage them.
NOTE: Protect painted surfaces with automotive
type wax.
Follow Engine Manual
Maintenance Schedule
Perform scheduled engine maintenance. Refer to
engine manual for detailed instructions.

Other manuals for Gravely ZT HD 44

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Gravely ZT HD 44 and is the answer not in the manual?

Gravely ZT HD 44 Specifications

General IconGeneral
Engine BrandKawasaki
Cutting Width44 inches
Deck Material10-gauge steel
Engine Size726 cc
Cutting Height1.5 - 4.5 inches
Spindle MaterialAluminum
SeatHigh Back
Ground Speed Forward8 mph
Ground Speed Reverse4 mph

Related product manuals