To Next PageTo Next PageWhat to do if my Gravely ZT X 42 Lawn Mower does not track straight?
If your Gravely Lawn Mower does not track straight, begin by checking the tire pressure and ensuring it matches the recommended specifications. If the issue persists, the steering levers may need adjustment. If the problem continues, the transaxles and/or linkages may require adjustment, which necessitates contacting your Gravely dealer.
Why does my Gravely Lawn Mower engine run rough?
A rough-running engine in your Gravely Lawn Mower could be caused by a few things. If your model is 915255, 915256, 915257, 915261, 915262, 915263, 915264, or 915274, check that the choke control knob is in the off position. Also, the air filter cartridge might be plugged, so clean or replace it.
What to do if my Gravely Lawn Mower is not tracking straight?
If your Gravely Lawn Mower isn't tracking straight, start by checking the tire pressure. Also, the steering levers may need adjustment, so adjust the steering levers.
Why is my Gravely ZT X 42 overheating?
If your Gravely Lawn Mower engine is overheating, it might be due to a low engine oil level, so add engine oil. Another cause could be plugged cooling fins, so clean the engine.
General| Engine Brand | Kawasaki |
|---|---|
| Cutting Width | 42 inches |
| Transmission Type | Hydrostatic |
| Deck Material | Steel |
| Number of Blades | 2 |
| Cutting Height Range | 1.5 - 4.5 inches |
| Transmission | Hydro-Gear EZT |
| Spindle Material | Aluminum |
| Ground Speed Forward | 7 mph |
| Ground Speed Reverse | 3 mph |
| Warranty | 3 years |
| Fuel Capacity | 2.8 gallons |
| Overall Width | 54 in |
| Turning Radius | Zero |
Understand safety symbols and signal words for hazard awareness.
Location and explanation of safety decals on the unit.
Details specific hazards like amputation, discharge, and tipping.
Guidelines for safe operation, operator age, and personal protection.
Pre-operation checks and preparation steps.
Procedures for starting and running the unit.
Procedures for checking oil, brakes, and interlocks.
Detailed steps for servicing blades, battery, belts, hydraulics.
Addresses engine, drive, and PTO problems.
