What to do if the bagger fails to pick up grass or leaves on my Gravely ZT Xl Bagger?
If the bagger on your Gravely Lawn Mower isn't picking up grass or leaves, the mesh bags might be full. You should empty the mesh bags. Another possible cause is that the bagger is clogged, so try unclogging it.
Why does the blower assembly stop or slow down on my Gravely Lawn Mower?
If the blower assembly on your Gravely Lawn Mower stops or slows down, it could be due to a clog in the blower assembly, so try unclogging the bagger. Alternatively, the V-belt might be worn or damaged, in which case you should replace it.
What to do if the airflow indicator points straight up on my Gravely Lawn Mower?
If the airflow indicator on your Gravely Lawn Mower points straight up, it means the airflow is restricted. This could be because the mesh bags are full, so try emptying them. Another possibility is that the bagger is clogged.
Overview of the manual's purpose and scope.
Instructions for locating and recording unit model and serial numbers.
Information on registering the product for warranty and service updates.
Warning against using non-genuine parts and liability disclaimers.
Statement regarding product changes and manual accuracy.
Customer responsibility for assembly and understanding instructions.
Explanation of safety symbols and signal words used in the manual.
Guidance on ensuring proper operator training before use.
Definitions for different types of reference information.
General safety practices and adherence to local regulations.
Warning to avoid touching hot components after operation.
Specific rules for safe operation, including slopes and guards.
Instructions for carefully unpacking and checking kit contents.
Step-by-step guide for installing counterweights on the unit.
Instructions for installing the sheave and adapter on the mower deck spindle.
Steps for mounting the blower assembly onto the mower deck.
Procedure for installing the V-belt and belt cover.
Specific modifications required for the belt cover on 54-inch decks.
Instructions for fitting the belt cover on 48- and 54-inch mower decks.
Instructions for fitting the belt cover on 42-inch mower decks.
Steps for installing the rear bagger cover assembly.
Guide for attaching the mesh bags to the bagger frame.
Procedure for mounting the mesh bags onto the cover assembly.
Instructions for trimming and installing the bagger hose.
Step-by-step instructions for removing the bagger assembly from the mower.
Pre-operation checks for bagger parts, counterweights, and hardware.
Steps for starting and operating the bagger unit.
Explanation of the airflow indicator for bagger performance.
Procedure for safely emptying the mesh collection bags.
Steps to safely clear clogs from the bagger hose and assembly.
Identification and placement of safety decals on the unit.
Details on extended warranty coverage periods for specific components.
Lists components and conditions excluded from warranty coverage.
Outlines customer duties for obtaining warranty service.
General| Model | ZT XL Bagger |
|---|---|
| Type | Bagger Attachment |
| Engine | Not applicable (attachment) |
| Cutting Width | Not applicable (attachment) |
| Cutting Deck | Not applicable (attachment) |
| Transmission | Not applicable (attachment) |
| Speed | Not applicable (attachment) |
| Fuel Capacity | Not applicable (attachment) |
| Bagger Capacity | 10.5 bushels |
| Turning Radius | Not applicable (attachment) |
To Next Page
