Gravity Measurement CPT20 - Add Up Function; Payment charge; Price Look Up (PLU); Calibration and Functions Setup

CPT20 USER MANUAL
7
Press the key to accumulate up to 20 data of weight and unit price. Must have
object to be weighed and unit price entered to be able to accumulate.
Recall accumulated data
Press the key to recall and view data of accumulated weight, unit price and total
price.
For example: If have accumulated three data, press the key to view the first saved
data. Press the key again to view the second saved data and third time to see the
third data, finally, press the key to view the total accumulated value of all three
data.
Add Up Function
Press the key for known unit price and quantity to add up total price.
Weight window shows added times.
Payment charge
Press the key and enter the payment amount, the scale will automatically calculate
the charge for customer.
Example: The total price is 15 dollar, press this key and enter 20 dollar, on the Unit Price
window will be displayed 5 dollar as the charge for customer
P1/P2 Price Look Up (PLU)
Press the key to select between PLU group 1 (P01 – P20) and PLU group 2 (P21
– P40).
The display will light up the group selected.
Save the Price Look Up (PLU)
Enter the desired unit price and press the key, then press one of the 20 PLU
memories (P01 – P20), the unit price will be saved in the appointed number.
To change save unit price, just repeat the same steps.
Calibration and Functions Setup