CPT20 USER MANUAL
6
Charge key, to calculate the charge for customer.
Memory clear key, press it at accumulation recall mode to clear single
accumulated data. At weighing mode will clear all accumulated data at
once
Zero key, to reset the residual weight back to zero (only when the display
weight is less than +/- 2% of the max. capacity). In the setup mode, it
means moving up.
Tare key, to subtract the weight of a container (tare range: full capacity).
Clear the piece weight window. When there is accumulated value and no
unit price, press this key to display total accumulated counts and total
accumulated price.
Price look up key, to save unit price (for detail refer to “save the price look
up).
Group key: to switch between P01-P20 and P21-P40
BASIC FUNCTIONS AND OPERATION
Tare function
Place a container on the platter and press the key, the weight of container will be
deducted. After a tare you will be able to weigh any object as its net weight.
Accumulation
To Next Page
Loading...
