Need help?Do you have a question about the Gravity Measurement CCT10 and is the answer not in the manual?
Calibrate zero weight, then place required mass for scale calibration. Follow on-screen prompts.
Calibrate the scale's zero point. Ensure the pan is stable and empty before starting.
Calibrate the scale's span using a known weight. Place required mass and confirm.
General| Capacity | 10 kg |
|---|---|
| Readability | 0.1 g |
| Repeatability | ±0.1 g |
| Linearity | ±0.2 g |
| Calibration | External |
| Auto Calibration | No |
| Display | LCD |
| Tare Function | Yes |
| Overload Protection | Yes |
| Weighing Units | g, kg, oz, lb |
| Operating Temperature | 0°C to 40°C |
To Next Page
