Gravity Measurement CPT20 - Spec calibration detail description; Unit Price Decimal Point; G Value Calibration; P1;P2 key setup

CPT20 USER MANUAL
9
In case it shows, the calibration has not been switched to ON position. Please switch the
switch to On and the scale will automatically start countdown sequence and back to
weighing mode.
Spec calibration detail description
D1, D2
Capacity and division
Price
Unit
Range
Resolution
73
6lb x 0.002 lb (above 3 lb)
3 lb x 0.001 lb (3 lb and less)
$/lb
Dual range
3000
74
15 lb x 0.005 lb (above 6lb)
6 lb x 0.002 lb (6 lb and less)
$/lb
Dual range
3000
75
30 lb x 0.01 lb (above 15 lb)
15 lb x 0.005 lb (15 lb and less)
$/lb
Dual range
3000
76
60 lb x 0.02 lb (above 30 lb)
30 lb x 0.01 lb (30 lb and less)
$/lb
Dual range
3000
For other D1D2 numbers, please check with the manufacturer.
D3 : Unit Price Decimal Point (Cent)
0
Unit Price/Total Price : Fixed no cent
1
Unit Price/Total Price : Fixed 0.0
2
Unit Price/Total Price : Fixed 0.00
3
Unit Price/Total Price : Fixed 0.000
4
Unit Price : Manual cent 0.00; Total Price : Fixed no cent
5
Unit Price : Manual cent 0.00; Total Price : Fixed cent 0.0
6
Unit Price : Manual cent 0.00; Total Price : Fixed cent 0.00
D4: G Value available for standard calibration or not
0
G value not available for standard calibration
1
G value available for standard calibration
D5: P1/P2 key setup
0
P1/P2 deactivate
1
P2 starts from P11
2
P2 starts from P21
3
P2 starts from P31
C a l o f f