INTRODUCTION
Your Great Plains Folding Drill is designed to give you
many
years
of
dependable service. This
Manual has been prepared
to
instruct you in the safe and efficient operation
of
this
machine.
Read
and study
it
thoroughly. Follow all instructions and service procedures carefully.
Should your Grain Drill require replacement parts,
go
to
the
Great Plains Dealer. That way you
will
be sure you
are
getting the proper parts.
It is important you complete and send in your Warranty
card
because
it
is
not valid unless
it
is
on
file at Great Plains. If you need information not contained in
this
Manual, contact your Great Plains
Dealer.
Thank you for buying a Great Plains Folding Drill.
OPERATING
CHECK
LIST
Roy Applequist
President
Before operating your Drill for the first time, make sure you have checked the following items:
D
1.
Read
operating instructions.
D
2.
Read
"Safety Rules'; Page
16.
D
3.
Check machine for loose bolts, set screws, pins and chains.
D
4.
See that all tires have proper air pressure.
D
5.
Lubricate Drill.
D
6.
Inspect feeder
cups
for foreign matter.
D
7.
Rotate each gauge wheel
to
see that the drive system
is
operating smoothly.
D
8.
Check for leaks in
the
hydraulic system.
To Next Page
Loading...
