To Next PageTo Next Page
Need help?Do you have a question about the GREAT PLANES Gee Bee and is the answer not in the manual?
Eligibility and rules for scale competition in AMA.
Crucial safety precautions for assembly and operation of the model.
Specifies required components and decisions before starting assembly.
Lists essential hardware, adhesives, and tools for building.
Provides key tips, screw types, and fiberglass safety guidelines.
Safety and handling guidelines for working with fiberglass components.
Information on how to obtain replacement components for the model.
Procedure for verifying all parts are present and in good condition.
Steps for preparing the model, including assembling a stand.
Step-by-step guide for attaching and hinging the ailerons to the wing.
Details on mounting aileron servos and connecting them with pushrods.
Instructions for joining the two wing panels with a dihedral angle.
Guide for attaching the main landing gear and wheel pants.
Steps for fitting and attaching the underside belly pan.
Procedures for mounting the engine and its throttle servo.
Instructions for assembling and installing the fuel tank.
Fitting the engine cowl, ring, and dummy engine assembly.
Attaching the horizontal stabilizer, elevator, rudder, and tailwheel.
Steps for installing servos, radio components, and pushrods.
Verifies that control surfaces move correctly in response to transmitter inputs.
Details the correct amount of control surface deflection for optimal flight.
Critical procedure for setting the correct center of gravity for stable flight.
Procedure for ensuring the model is balanced side-to-side for stable flight.
Important step to label the model with owner information for identification.
Instructions for properly charging the transmitter and receiver batteries.
Explains the importance of balancing propellers to prevent vibration.
Essential checks to perform on the model before its first flight.
Procedure to verify the operational range of the radio control system.
Excerpt from the Academy of Model Aeronautics safety code for safe operation.
Recommendations for engine fuel mixture to prevent overheating and dead sticks.
Guidance on performing a safe and successful takeoff.
Advice for initial flights, trimming, and familiarization with the model.
Information on the model's aerobatic capabilities and performance.
Procedures to follow in case of engine failure during flight.
Instructions for executing a safe landing approach and touchdown.
General| Brand | GREAT PLANES |
|---|---|
| Model | Gee Bee |
| Category | Toy |
| Language | English |
