19
7.10 DRY mode operation
● If room temperature is higher than the set temperature, the compressor will run at the fixed frequency and the indoor fan
will run at low speed. If room temperature is 2℃ lower than the set temperature, the compressor will stop, the outdoor fan
will stop after 30sec and the indoor fan will stop immediately and start running at low speed after 5min.
● In this mode, the temperature setting range is 16℃～30℃.
● At this time, the LCD appears green.
3. Press the SWING button
and the guide louver starts to
swing automatically and stops
when it is pressed again.
4. Press the TEMP button to
set the desired temperature.
2. Press the MODE button
to select “ ” mode.
1. After power-on, press the “1/0” button to
set the air conditioner running.
To Next Page
Loading...
