22
7.13 SLEEP mode operation
In COOL and DRY mode, after the SLEEP program has run for 1 hour, the set temperature will be increased by 1℃ in the
first hour, and increased by 2℃ in the second hour. Then the unit will run at this set temperature.
In HEAT mode, after the SLEEP program has run for 1 hour, the set temperature will be decreased by 1℃ in the first hour,
and decreased by 2℃ in the second hour. Then the unit will run at this set temperature.
4. Press the FAN button to
set fan speed.
3. Press the SWING button
and the guide louver starts
to swing automatically
6. Press the SLEEP button
to select SLEEP mode and
press it once again to exit
SLEEP mode.
5. Press the TEMP button
to set the desired
temperature.
2. Press the MODE button
to select “ ”, “ ”
and “ ” mode.
1. After power-on, press the “1/0”
button to set the air conditioner running.
To Next Page
Loading...
