Option 2 Gravity Drain Hose
1. Hose is not provided, so user shall prepare it in advance.
[Size: The hose should have an inner diameter of 14mm]
2. Remove bucket from the unit as instructed.
3. Thread the drain hose onto the nozzle and make
sure it's securely locked.
4. Replace the bucket. Make sure the drain hose goes through the bucket's drain
the hole with a lid. Note that drain hose should not be pressed, otherwise
water can not be drained out.
Note:
When you want to take off the drain hose, prepare a receptacle to collect
water from the nozzle.
drain hose
nozzle
10
To Next Page
Loading...
