Other Instructions
1. Alarm Warning
If bucket is full or not locked into place for over 3min, buzzer will go off for 10s
to remind you to empty bucket or put it back into the correct place.
2. Auto Stop
When bucket is full, removed or not placed correctly will automatically stop.
3. Memory Function
If power is lost, all of the control settings are remembered. So when power is
restored, the unit will start back up in the settings it was in when power was
lost.
4. Bucket full light
This indicates that bucket is full or removed or not placed correctly.
6
Notes:
● Do not remove the bucket while unit is in operation.
● If you want to use drain hose to drain water away, please install the hose acc-
ording to section "Drainage method".
● Each time pressing the effective button on the control panel will give out a
"beep" sound.
under standby status.
● When tuning on the unit, the running indicator is ON. Running indicator is OFF
Bucket full light indicates
bucket needs to be
Continuous operation
Running on
indicator light
on indicator light
Smart mode on
indicator light
emptied or it is not in
the proper place
GDN10AY-K4EBA1B
FILTER Button
+/- Button
Running Button
Display
To Next Page
Loading...
