21
Technical Information
Service Manual
2.Personal setting
Purpose: Set name (device name, preset name, etc.) and image (device image) for the convenience of user identication.
(1) Set device name
After quick conguration, a list of controllable smart devices will be generated.
Step 1: Click and hold "a3" to enter the page "Edit device". Click "Image" to select the source of image. Select from "Default images" or
"Take a picture" or "Picture gallery" and save an image.
Step 2: Click "Name" to change device name. As shown in the picture, device name is changed to "baby home". Save it and the new
device name will be shown.
(2) Set preset name
Step 1: Click at the top right corner of the homepage "Home control". Select "Add preset" and enter the page "Preset edit".
Step 2: Choose the time. Click "Name" to edit it. As shown in the picture, it is edited to "baby room". For timer type, select On. Then select
the repeat days. Save the
setting of preset name.
To Next Page
Loading...
