Gree GMV-224WL/C-X - Page 132

GREE DC Inverter Multi VRF System II Service Manual
128
Removal operation for blade
Remark: Before removing the motor, please make sure that the unit is disconnected with the power.
Process
Photo
Operation Instruction
2. Remove
blade
● Loosen nuts fixing the blade
with wrench
● Then remove the blade and put
it on the floor flatly
3. Remove
motor
● Loose screws fixing the motor
with screwdriver
● then remove the power cord of
motor
● Take out the damaged motor
4. Install motor
● Replace the motor, tighten
screws with screwdriver and then
connect the power cord of motor