Gree GMV-80WL/C-T User Manual

GREE DC Inverter Multi VRF System II Service Manual
111
Removal operation of compressor
Remark: Before removing the compressor, please make sure that there’s no refrigerant inside the pipeline and the power
is disconnected.
Process
Photo
Operation Instruction
6
)
Connect suction
pipe and discharge
pipe of copressor
and pipeline of
system again
Weld the connection
pipe of compressor,
connect the pipeline
and compressor
Note: During welding
process, do not let
flame burn out other
parts
7)
Connect the
power cord of
compressor well
● Loose screws fixing
the power cord with
screwdriver
● conenct the power
cord well again
Note: When
connecting the power
cord, make marks for
different color power
cords and
corresponding wiring
terminals.
8
)
Check and open
the upper cover
plate
●Check
whether the
pipeline is connected
well
●Check whetehr all
parts and connection
wires are connected
well
●If there’s no problem
after checking, install
front and rear cover
plates.

Gree GMV-80WL/C-T Specifications

General

Brand	Gree
Model	GMV-80WL/C-T
Category	Air Conditioner
Language	English